Quick Links: Omega III MCR Spin Welder • Hand Held Plastic Heat Staking • Plastic Joining • Ultrasonic Plastic Welding Machine • Heatstaking Tool • Heat Staking Tool • Heat Staking Tooling • Plastic Assembly Systems • Plastic Welders • Ultrasonic Plastic Welders • Heat Staking - Thermal Assembly Systems • Heat Staking Machines • Spin Welders - Spin Welding • Ultrasonic Welders • Vibration Plastic Welding • Hot Plate Plastic Welding • Ultrasonic Welding Machine • Plastic Heat Staking

Mechanical Specifications:

• Dimensions: 43 ½” H x 16” W x 33 ½” D (1105mm x 406mm x 851mm)
• Base Plate: 15” W x 13 ½” D (394mm x 343mm)
• Pneumatic: 80 psi minimum/100 psi maximum. Clean, dry, unlubricated air, 3/8” (10mm) ID supply line. Two separate air inlets required; one for the rotary air motor, and one for the vertical movement of the head.
  - Air supply for rotary motor: ID supply line 5/16” (8mm). An average 5-second cycle consumes 2.5 SCFM of air.
  - Air Supply for head movement: ID supply line ¼” (6mm).
• Electrical: 220 volts AC, 60 Hz (available with 110 volts AC or 480 volts AC with optional transformer).
• Holding fixture: Eight 3/8-16 UNC tapped holes on 7” and 4” bolt hole pattern (on center, X and Y axis).
• Head height adjustment: 14” (250mm).
• Cylinder diameter: 2 ½” (63mm). 3.15” (80mm) cylinders available as an option.
• Cylinder Stroke: 4” (100mm). 8” (200mm) stroke available as an option.
• Center of drive to column: 8 ¼” (210mm).
• Weight: 200lb. (91 kg).

Additional Required Features:

• Tooling: “upperchuck” (spin welding drive head) and holding fixtures are not included as part of the base machine price and must be purchased separately.

 

---

Specifications and Dimensions

Download .pdf Spec Sheet