| |
 |
| |
 |
A manual press is available for assembling
parts where production volume does not justify more expensive
pneu- matic presses. The press provides a more controlled
motion of the welder than is possible by just holding
the hand gun, resulting in more consistent assemblies.
This unit is available with foot switch or cam actuation.
The trigger handle is removed from the hand gun housing
when foot switch actuation is used.
Order No. - HH-ARB for 20 kHz and 40 kHz |
| |
The
pneumatic press is similar in style to the Manual Press,
yet it contains dual anti-tie down palm buttons, a pressure
regulator, and a pneumatic timer with all the required
control.
Order No. - HH-ARBP for 20 KHz and 40 kHz |
| |
|
|
A
lightweight stapler attachment is optional for the Model
CV52 and CV54 hand guns. It is ideally suited for sealing
low production rate clamshell packages. The stapler is
designed with a special privoting mechanism that is attached
to the standard hand held welders. The mechanism contains
a steel anvil that applies pressure to a small area on
the flanged outer edge of the clamshell package. The anvil
is supplied with two sealing patterns. The standard is
a medium diamond knurl on one end and a course diamond
knurl on the other. To switch from one sealing pattern
to the other, the anvil can be rotated 180 degrees.
Order No. - HH-STAP for 20 kHz and 40kHz |
| |
|
|
The
Pistol Grip is designed to provide a more ergonomic handling
of the handpiece for certain applications. It is a lightweight
device that simply slips onto the hand guns. The operator
activates the ultrasonics by pulling on the
“trigger.”
Order No. - HH-PST for 20 kHz and 40 kHz |
|
| |
|
| |
